Home

This product is water based table glue for wide application on either table or machine printer. It forms a surface layer with strong tackiness, excellent cohesion and without peeling.

Specialty:
 

• Excellent adhesion with fabric.
• Very stabilize to a different variety of climate and heat resistance.
• No yellowing, complete transparency after coating on table.
• APEO Free and Formaldehyde Free formulations.
• No harmful or distracting odors in the work place.

Guidance:
 

• Ready for use, direct coating on printing table and recommend 2-3 coats for better performance. Drying completely is required before next coat. After well drying, production can be run immediately.
• Reduction of viscosity can be adjusted by tap water.
• It is compatible with most kind of formulated resin. However, it is necessary to check the stability when mixing.

Precautions:
 

• Containers must maintain air-tight seal while not in use.
• During Production, heat application can be applied to speed up the process.
• Any application not referred in this Product Information should be pre-tested or consulted with Primus Technical Service prior to print.

Specifications:
 

Apperance	Milky White Paste
Solid content	50 ± 1.5 % (120℃/2gs/2 hours)
pH Value	7.0 ~ 8.0/25℃
Ionicity	Ionic
Viscosity	22,000~24,000CPS (LC#4/30rpm/25℃)