Table Glue 54
This product is water based table glue for wide application on either table or machine printer. It forms a surface layer with strong tackiness, excellent cohesion and without peeling.
- Excellent adhesion with fabric.
- Very stabilize to a different variety of climate and heat resistance.
- No yellowing, complete transparency after coating on table.
- APEO Free and Formaldehyde Free formulations.
- No harmful or distracting odors in the work place.
- Ready for use, direct coating on printing table and recommend 2-3 coats for better performance. Drying completely is required before next coat. After well drying, production can be run immediately.
- Reduction of viscosity can be adjusted by tap water.
- It is compatible with most kind of formulated resin. However, it is necessary to check the stability when mixing.
- Containers must maintain air-tight seal while not in use.
- During Production, heat application can be applied to speed up the process.
- Any application not referred in this Product Information should be pre-tested or consulted with Primus Technical Service prior to print.
|Apperance||Milky White Paste|
|Solid content||54 ± 1.5 % (120℃/2gs/2 hours)|
|pH Value||7.0 ~ 8.0/25℃|
|Viscosity||54 ± 1.5 % (120℃/2gs/2 hours)|