Home

Home > Products Catalog > PLASTISOL INKS > PLAST Additives > Add. Thickening Powder

Add. Thickening Powder

 
Details:                                                                                                                                                                                                                                               
Add. Thickening Powder M-10 is a white appearance small particle powder form and its main function is to increase viscosity while mixing 2-5% into Plastisol by customer’s desired viscosity. Well stirred by 10-15 minutes with automatic stirrer or by manual till powder is well resolved with inks.
 
Specialty:
 
  • No side effect while mixing with inks.
  • Excellent matt finish result given.
  • Can be mixed with all type Primus-PLAST Inks.
  • Ecological friendly product to meet all meet all key international environmental standards.
  • No harmful or distracting odors in the work place.
Guidance:
 
  • Containers/bag must maintain seal while not in use.
  • Any application not referred in this Product Information should be pre-tested or consulted with Primus Technical Service prior to print.
Precautions:
 
  • Containers must maintain seal while not in use.
  • Any application not referred in this Product Information should be pre-tested or consulted with Primus Technical Service prior to print.

Specification:
 
Appearance White Powder Form
Chemical 100% Synthetic Silica
pH Value 3.6 ~ 4.5
Solubility(water) In-Soluble 
Packing 10 kg/Bag
All Rights Reserved by Primus Chemical Co.,Ltd.